+30 2121002197 info@ensen.gr
Viewed 2909 Times

Yes, but not dramatically. The amount of cooling depends on the substrate material, the dwell time of the dry ice blast stream, and the dry ice usage. For example, a 30 inch (76.2 cm) by 30 inch (76.2 cm) rubber mold may have an initial temperature of 325°F (162.8°C). After the tool has been blasted clean (approximately 12 minutes), the temperature of the mold is about 300°F (148.9°C).

Was this answer helpful ? Yes (0) / No (0)